Innovative Tool Sales

Bilz Tool Company

The Global Leader in Quick Change Toolholders for the Metal Working Industry.

HFP - Quick Change Tapping Chucks

Together with the Bilz Quick Change Chucks and adaptors the HFP system can securely monitor the right hand rotation as well as the left hand rotation.

The high frequency transmitter integrated in the chuck reacts on the length compensation of the chuck which is pressed together while the safety clutch is engaging in the right hand direction and which is pulled out in the left hand direction.

The released signal is transmitted over the antenna to the HF receiver and than used for stopping the machine. To secure a safe signal also under difficult conditions for example while the the tapping chuck is in the workpiece or in the device, the HF transmitter pulses the signal for 5 sec. The position of the chuck changes in this time while driving back in start position and the HF signal reaches the receiver securely.

The effective monitoring of the right hand rotation and the pulsing of the signal after initializing the tapping operation means that malfunctions are detected immediately. Scrap or expensive subsequent machining will be avoided with this system.