Kyocera Brochures

Innovative Tool Sales

	Brochures

Click on image to download desired Brochure in PDF format


			ADMM Milling Inserts ADMM milling inserts feature an expanded line of new radius sizes. US stock available in cermet, PVD coated carbide, and uncoated carbide grades.				CA5505/CA5515 CA5525/CA5535 CVD Coated Carbide for Steel Brochure CVD coated carbide grades for steel. The new bright gold coating technology prevents chip adhesion, sudden fracture and reduces cutting forces. The crack-free coating technology provides higher productivity.

			Ceramics Kyocera’s long tradition of cutting edge ceramic technology continues with the new MEGACOAT PT600M grade. Also featured in our new Ceramics brochure are traditional ceramic grades A65, A66N, KS6000, and cell fiber ceramic grade CF1.				Double Clamp Tool Holder Kyocera's new Double-Clamp Toolholders securely clamp the inserts with a single action providing increased clamping rigidity, improved machining stability, and greater insert life.

			CA6515/CA6525 CVD Coated Carbide for Stainless Steel CVD coated carbide grades for stainless steel. Advantages include minimized notching, burr prevention and reduced edge build-up and adhesion.				CJ Chipbreaker Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profiling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.

			Double-Sided Swiss Tools Double the cost savings with Kyocera’s new double-sided negative inserts. The new innovative double-sided design allows both edges to be used. Compared to the positive type, the double-sided design offers less cost per edge and more stability.				KBN510/KBN525 Micro-grain CBN Grades The uniform distribution of the CBN material improves both wear resistance and toughness. KBN510 is for general purpose and finishing of hardened steels while KBN525 is ideal for interrupted machining of hardened steels.

			Drilling Kyocera’s new Drilling Brochure details the popular line of Magic Drills along with Kyocera’s newest line of drills including the Holeshot Drill, the Coremaster Coredrill, and the Stinger Drill>				Dynamic Bar Kyocera's new Dynamic Bar boring bar has an AeroDynamic design for improved chip evacuation, reduced chattering, and stable machining. Download Inch Size Only

			KTKF Brochure KTKF back turning, threading, and cut-off tools for Swiss machining.				M-Series Milling Kyocera’s popular M-Series milling cutters. Individual Sections are downloadable here: MEC MECX MECH MSR MSRS MEY

			OTM API Ring Groover Kyocera’s OTM API Ring Groover is ideal for high pressure and high temperature applications in the oil, gas and petrochemical industries. With a low cost per cut and free cutting geometry, it is the most economical way to make API Ring Grooves.				OTM Milling The OTM Milling Line features an economical selection of end mills, face mills, and chamfer mills for a variety of applications. The brochure also includes information on ordering customized tooling for your specific milling applications.

			Megacoat CBN Kyocera's new PVD Coated CBN featuring new Megacoat PVD Coating Technology.				Magic Drill The Magic Drill has 4 available corners to promote increased efficiency. Molded chipbreaker produces 3 separate chips for smooth chip evacuation. The new silver nickel coating prolongs tool life and improves chip flow. Inserts are now available in PR830 and PR1025, PVD coated carbides for general steel applications.

			MECH Helical End Mill The new MECH Helical Endmill is the best solution for eliminating heavy milling problems. Advantages include maximized machining efficiency, improved chip evacuation, and reduced cutting force.				MEC Ultra Hurricane Endmills & Facemills The MEC-series cutters are designed to offer higher productivity. The unique design lowers cutting forces, withstands heavier cuts and allows for increased feedrates. A silver coating and larger chip pocket radius protect the tool. There are seven insert radii, 0.008", 0.016", 0.031", 0.047", 0.", 0.079", and 0.122" available in cast iron, steel, and stainless steel grades.

			MECX Fine-Pitch Endmills and Facemills Brochure Extra fine-pitch increases machining efficiency, lowers cutting forces and is ideal for lower horsepower machines. Available inserts include PR830 for steel, PR905 for cast iron and PR1025 for stainless steel.				MSR Heavy Roughing Milling Cutter The MSR "Monster" heavy roughing milling cutter doubles productivity by doubling the metal removal rate. Notched inserts promote larger depths of cut and excellent chip control. Heavy machining with low cutting forces.

			OFMT Octagonal Milling Inserts Octagonal milling inserts with 8 cutting edges are available in PVD coated carbide grades for steel, stainless steel, and cast iron.				PH/PX Chipbreaker The CA55 Series coated carbide large I.C. inserts are perfect for heavy machining applications.

			SIGE Internal Grooving SIGE Internal Grooving toolholders and inserts for small diameter I.D. grooving. The innovative toolholder design provides cost effective chip evacuation and control.				TN6020/PV7020 Super Micro-grain Cermet Brochure Achieve higher cutting speeds and excellent surface finishes with super micro-grain size TN6020 and PV7020. The fine grain size provides improved toughness and stability which in turn leads to greater productivity. Use when excellent surface finishes are required.

			Ultra Drill Mill The MEY multi-function endmill is capable of slant milling, helical milling, drilling, shouldering, pocketing, and grooving. PVD Coated Carbide grades are available in PR830 for steel and stainless and PR905 for cast iron.				VF Chipbreaker Good chip evacuation at small depths of cut and high feed rates. Low cutting resistance. Improved chip evacuation when profiling and pulling up. Combined with the CA55 series, high efficiency and long tool life is assured for shaft profiling.

			Cera-Notch Grooving & Threading System				Materials Hardness Conversion Chart